Heating Services in Anchorage, AK
Heating Services companies serving Anchorage — compare ratings, hours, and contact details.
16
Pros actively working
4.1
What people rate them
78
Real reviews
Anchorage, Alaska HVAC company map
See where the best heating services crews are located around Anchorage, Alaska.
Loading the map...
Heating Services in Anchorage: what the listings show
Of the 16 Heating Services contractors listed in Anchorage, 4 advertise 24-hour availability and 5 are open on Sundays.
16
contractors listed
4
open 24 hours (29%)
5
open Sunday (36%)
6
open Saturday (43%)
11
have a website
Why Anchorage's frigid weather breaks HVAC systems
In Anchorage, summer highs average 74°F. That strains compressors, refrigerant lines, and condensate drains. Common local issue: heat exchanger wear due to long duty cycles. Recommended: systems rated SEER2 16+ for this climate.
Complete Heating Services in Anchorage
Furnace repair
Ignitor, flame sensor, and gas valve service.
Boiler service
Circulator and pressure diagnostics.
Heat pump tuning
Defrost cycles and auxiliary heat setup.
Emergency heat
Rapid heating restoration during cold snaps.
Heating Services costs in Anchorage (2026 estimates)
| Service | Low | High |
|---|---|---|
| Tune-up | $196 | $294 |
| Emergency call | $392 | $588 |
| Furnace replacement | $5,304 | $7,956 |
Prices reflect local labor rates in Alaska.
Serving Anchorage and surrounding neighborhoods
Verified heating services companies cover ZIP codes across the Anchorage metro and surrounding areas.
Anchorage HVAC permits & rebates
Permits Required
Most system replacements in Anchorage require a permit from the Anchorage Building Department.
Available Rebates
Check for rebates with your local utility provider for SEER2 heat pumps, smart thermostats, and insulation upgrades.
Anchorage HVAC FAQ
Furnace repairs in Anchorage average $350–$900 in 2026. Ignitor and flame sensor replacements run $150–$350. Gas valve and heat exchanger repairs start at $600.
If your furnace is over 15–20 years old and repairs exceed $1,000, replacement is typically the better investment. High-efficiency 96% AFUE units qualify for federal tax credits and can reduce heating bills by 20–30%.
In Anchorage's very cold winters, look for 80% AFUE minimum. For colder climates or high gas rates, 96% AFUE condensing furnaces reduce costs significantly and qualify for IRA tax credits.
Yes. Anchorage requires a mechanical permit and gas line inspection for furnace replacements. Only licensed contractors should pull permits — unpermitted work can void warranties and create insurance liability.
Top HVAC pros in Anchorage
Compare verified providers with strong local reputations and recent customer feedback.
Call to confirm availability and request a quote.
Need heating services in Anchorage today?
One call connects you with an available local contractor — no forms, no waiting.
Heating Services reviews in Anchorage
Hear from Anchorage homeowners about their experience with local heating services companies.
By far the worst experience from the start. I encounter three different individuals and none of them were nice. From the woman who took my call at 8am, to the service manager Steve and to whoever showed up to take a look at my unit. I called the office when they opened to let them know my heat was out and had been referred to them. The woman who answered informed me that Steve would call me back. Hours went by and I heard nothing so I called back to get a possible ETA and was told they were busy and would get to me when he could. Steve called and was equally gruff and rude. I had to ask for an ETA for the technician coming out as it wasn't offered. When the tech came over, he walked by me and mumbled his name and where he was from and I had to ask again and still couldn't understand what his name was. He didn't ask what was going on, I started to tell him and he stops and asks "are you sure you don't have heat?" He proceeded to look at my system and tell me that I needed several parts that he wasn't sure he could find because my system is older and said he could almost guarantee that something would break while he was working on it and my system would need to be replaced this winter anyway. I asked what time line I was looking at to get it fixed or replaced and he shrugged his shoulders and said he didn't know, maybe 1 to 2 days. Ironically I went to the Lowes website to look up the type of unit he wanted to replace mine with and I requested a free quote and don't you know that Lowes sent my referral to this place again? I got a call the next morning from the same woman who was rude the first time but this time she was extremely nice. Probably because she thought she was going to sell me a unit I didn't need. It was the worst experience. Within 30 minutes of the tech being at my house, I went to Extreme Heating where my system was up and running within 24 hours.Which was before I even heard back from Flow Star to schedule an appt to fix the unit.
Way overbid for four hours of work. Work was completed in an about an hour and the guy ended up damaging some of my tenant's art. When I called to complain I was accused of lying and nothing was offered in the way of an apology or compensation.
Anchorage, AK. They showed up on time and ready to get the job done. They worked extremely hard and covered all flooring to ensure cleanliness. Their work ethic and attention to detail is unsurpassed. It is very clear that these gentlemen take pride in their work. They left the work area immaculate after installing a brand new whole house heating unit. I would recommend these installers without Reservation!
Heating Services performance guide for Anchorage, Alaska
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in Anchorage, Alaska
Anchorage, Alaska sits in a Very Cold climate zone with average summer highs near 74°F and winter lows near5°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
Extended heating cycles strain heat exchangers and blower motors. Inspect ignition systems and combustion safety annually.
Most common local breakdowns
Cracked heat exchangers from high duty cycles and delayed service.
Frozen condensate lines and iced outdoor coils during subfreezing weeks.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Cold-climate heat pumps with auxiliary heat or a 90+ AFUE furnace backup reduce stress on the heat exchanger during deep-freeze cycles. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Furnace + AC setups need annual heat exchanger inspection, verified combustion, and balanced blower airflow.
Local code and housing notes
Ask contractors about Alaska energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: Alaska HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank