Heating Services in Texas
Heating Services contractors across Texas — compare ratings, hours, and contact details.
264
Pros actively working
4.3
What people rate them
832
Real reviews
Texas HVAC map
See where the heating services pros are located in Texas.
Loading the map...
Back to nationwide coverage: Heating Services in the United States
HVAC Market Overview in Texas
Overview of heating services providers in Texas. Use this data to identify qualified providers prior to contact.
264
Contractors listed in Texas
We do not independently verify licensing or insurance — confirm credentials with the contractor.
131
4.5★ or better
50% of heating services companies are keeping customers happy in Texas.
4.3
Avg Google rating
Median Google rating 4.6 across 264 listed contractors.
Quick tip
Compare ratings and opening hours, and request multiple quotes to compare service costs.
HVAC challenges in Texas's hot-humid climate
In 2026, Texas systems face long run times, shifting humidity loads, and higher demand on evaporator coils, heat exchangers, and refrigerant lines. Match equipment to SEER2 and AFUE targets to avoid mid-season failures.
Texas HVAC codes & 2026 rebates
Licensing body: Texas Department of Licensing & Regulation. Permits are typically required for full system replacements, new gas line work, or major duct modifications in Texas.
Incentives: 2026 Inflation Reduction Act rebates and local utility programs can offset SEER2 heat pumps, insulation, and smart thermostat upgrades.
Average heating services costs in Texas (2026)
| Service | Texas avg | National avg |
|---|---|---|
| Heating repair | $520 | $500 |
| Furnace replacement | $6,760 | $6,500 |
| Boiler service | $572 | $550 |
State averages use a regional labor index multiplier for 2026and should be validated with local bids.
Frequently asked questions about heating services in Texas
What heating system works best in Texas?
Texas's hot-humid climate determines the right system. Very cold zones favor high-AFUE gas furnaces (95%+) or cold-climate heat pumps with auxiliary electric backup. Milder zones can rely on heat pumps alone for year-round efficiency.
How much does furnace replacement cost in Texas?
A mid-efficiency gas furnace replacement in Texas averages $4,500–$7,500 installed. High-efficiency 90%+ AFUE units run $6,500–$10,000. Heat pump systems are higher upfront but eligible for IRA tax credits that can offset $2,000 or more.
Do I need a permit to replace a furnace in Texas?
Yes. Texas requires a mechanical permit and gas line inspection for furnace replacements. Work must be performed by a licensed contractor. Unpermitted heating work can void equipment warranties and create insurance liability.
What AFUE rating should I look for?
In Texas's hot-humid climate, look for 80% AFUE minimum for gas furnaces; 90%+ AFUE for maximum efficiency. ENERGY STAR-certified units (96%+) qualify for federal tax credits and may qualify for utility rebates in Texas.
Top HVAC pros in Texas
Compare verified providers with strong local reputations and recent customer feedback.
Call to confirm availability and request a quote.
Call to confirm availability and request a quote.
Call to confirm availability and request a quote.
Call to confirm availability and request a quote.
Need heating services in Texas today?
One call connects you with an available local contractor — no forms, no waiting.
Heating Services reviews in Texas
What Texas customers say about local heating services pros.
I don’t think you can find a better value for HVAC services than these guys. Other bids that I got were at least 20 to 30% higher and these guys take their commitment to good service seriously.
This place is awesome! Wendy and Jesse are amazing. Try so hard to get the right parts asap. Retuning soon!
I needed help with an old floor furnace in the tower, and after trying a couple of other places that wouldn’t touch it because of its age, I reached out to Hines Family HVAC Repair. Danny came out right on time and was very friendly. I appreciated that the appointment was set for a specific hour, not a huge window like some other companies. Even though we found out that PG & E needed to come out before any work could start, they didn’t charge me for the visit. Their customer service was impressive, and I felt well taken care of. This is a great choice for HVAC repair in Brownsville, especially if you have older equipment.
My air conditioning unit kept tripping the breaker every time it started up, even after I did some basic maintenance and replaced the breaker myself. When I called this HVAC company in the evening during a really hot spell, Cameron got back to me quickly and was very friendly. Cameron came out the next day and fixed the issue in just a couple of hours, and the price was very reasonable. I was so relieved that I didn’t have to replace my whole AC unit, especially in this Texas heat. The customer service was excellent and I highly recommend this company for anyone having HVAC problems!
Very professional. I got a detailed estimate (no one else did this), great communication, showed up on time and completed the work competently. Highly Recommend.
Heating Services performance guide for Texas
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in Texas
Texas sits in a Hot-Humid climate zone with average summer highs near 90°F and winter lows near40°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
High moisture accelerates coil biofilm and condensate drain clogs. Target stable airflow, clean evaporator coils, and verified dehumidification control.
Most common local breakdowns
Condensate drain clogs and evaporator coil biofilm from high indoor humidity.
Blower motor strain from long run times and high static pressure.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Prioritize variable-speed heat pumps with enhanced dehumidification and SEER2 16+ ratings to protect refrigerant lines and the evaporator coil. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.
Local code and housing notes
Ask contractors about Texas energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: Texas HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank