Heating Services in District Of Columbia
Heating Services contractors across District Of Columbia — compare ratings, hours, and contact details.
5
Pros actively working
4.4
What people rate them
15
Real reviews
District Of Columbia HVAC map
See where the heating services pros are located in District Of Columbia.
Loading the map...
Back to nationwide coverage: Heating Services in the United States
HVAC Market Overview in District Of Columbia
Overview of heating services providers in District Of Columbia. Use this data to identify qualified providers prior to contact.
5
Contractors listed in District Of Columbia
We do not independently verify licensing or insurance — confirm credentials with the contractor.
2
4.5★ or better
40% of heating services companies are keeping customers happy in District Of Columbia.
4.4
Avg Google rating
Median Google rating 4.3 across 5 listed contractors.
Quick tip
Compare ratings and opening hours, and request multiple quotes to compare service costs.
HVAC challenges in District Of Columbia's mixed-humid climate
In 2026, District Of Columbia systems face long run times, shifting humidity loads, and higher demand on evaporator coils, heat exchangers, and refrigerant lines. Match equipment to SEER2 and AFUE targets to avoid mid-season failures.
District Of Columbia HVAC codes & 2026 rebates
Licensing body: District Of Columbia Contractor Licensing Board. Permits are typically required for full system replacements, new gas line work, or major duct modifications in District Of Columbia.
Incentives: 2026 Inflation Reduction Act rebates and local utility programs can offset SEER2 heat pumps, insulation, and smart thermostat upgrades.
Average heating services costs in District Of Columbia (2026)
| Service | District Of Columbia avg | National avg |
|---|---|---|
| Heating repair | $500 | $500 |
| Furnace replacement | $6,500 | $6,500 |
| Boiler service | $550 | $550 |
State averages use a regional labor index multiplier for 2026and should be validated with local bids.
Frequently asked questions about heating services in District Of Columbia
What heating system works best in District Of Columbia?
District Of Columbia's mixed-humid climate determines the right system. Very cold zones favor high-AFUE gas furnaces (95%+) or cold-climate heat pumps with auxiliary electric backup. Milder zones can rely on heat pumps alone for year-round efficiency.
How much does furnace replacement cost in District Of Columbia?
A mid-efficiency gas furnace replacement in District Of Columbia averages $4,500–$7,500 installed. High-efficiency 90%+ AFUE units run $6,500–$10,000. Heat pump systems are higher upfront but eligible for IRA tax credits that can offset $2,000 or more.
Do I need a permit to replace a furnace in District Of Columbia?
Yes. District Of Columbia requires a mechanical permit and gas line inspection for furnace replacements. Work must be performed by a licensed contractor. Unpermitted heating work can void equipment warranties and create insurance liability.
What AFUE rating should I look for?
In District Of Columbia's mixed-humid climate, look for 80% AFUE minimum for gas furnaces; 90%+ AFUE for maximum efficiency. ENERGY STAR-certified units (96%+) qualify for federal tax credits and may qualify for utility rebates in District Of Columbia.
Top HVAC pros in District Of Columbia
Compare verified providers with strong local reputations and recent customer feedback.
Call to confirm availability and request a quote.
Rated 5.0 on Google. Call to confirm availability and request a quote.
Rated 4.6 on Google. Call to confirm availability and request a quote.
Rated 4.1 on Google. Call to confirm availability and request a quote.
Need heating services in District Of Columbia today?
One call connects you with an available local contractor — no forms, no waiting.
Heating Services reviews in District Of Columbia
What District Of Columbia customers say about local heating services pros.
LV was terrific! Responsive, efficient and cost-conscious.
We had a dripping faucet in the kitchen and low water pressure in the bathroom. They're were easy to schedule, worked quick (2 hours less than originally scheduled), professional, and affordable. After dealing with bad plumbers at other companies, these guys were a welcome change. If we need work done in the future, we're calling Stevens.
I had an excellent experience with DH Stevens for a recent plumbing issue. Their team was professional, prompt, and highly skilled. They quickly diagnosed the problem, explained the solution clearly, and completed the repair efficiently. The level of service was outstanding, and their attention to detail was impressive. I highly recommend DH Stevens for anyone in need of reliable and top-notch plumbing services!
Very rude & no customer service skill They close at 4:30 I showed up at 3:00 and they were mad at that if you don’t like your job go work somewhere else
I requested to get bath faucet and the tub replacement including getting the part from them. I was told the parts will cost $150( and I asked specifically if it comes the part includes the tub part, and the company confirmed its a set and yes), for plumber to come out $65, and didnt mention the hourly rate. They charged additional amount $32 for the tub part on top of the $150, and the hourly rate of $155(which was not mentioned when I asked what the estimate cost for the whole job)This is my fault not getting the written cost. I called the company and the guy I spoke with said he told me the tub part is additional and the hourly cost $155 which is not true. The total cost for the job including calk ended up being $571. To avoid any of this, I highly suggest to get a WRITTEN quote before getting the job( do not believe any of the verbal conversation where there wont be any evidence). The plumber Tim was great.
Heating Services performance guide for District Of Columbia
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in District Of Columbia
District Of Columbia sits in a Mixed-Humid climate zone with average summer highs near 85°F and winter lows near25°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
Seasonal swings stress refrigerant lines and condenser capacity. Verify charge and airflow to protect the evaporator coil.
Most common local breakdowns
Evaporator coil icing from low airflow and clogged filters.
Capacitor failures on the condenser during peak cooling loads.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Balanced systems with SEER2 15+ and solid filtration protect the blower motor, coils, and compressor year-round. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.
Local code and housing notes
Ask contractors about District Of Columbia energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: District Of Columbia HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank