HVAC Installation & Service in Atlanta, GA
HVAC Installation & Service companies serving Atlanta — compare ratings, hours, and contact details.
245
Pros actively working
4.6
What people rate them
87
Real reviews
Atlanta, Georgia HVAC company map
See where the best hvac installation & service crews are located around Atlanta, Georgia.
Loading the map...
HVAC Installation & Service in Atlanta: what the listings show
Of the 245 HVAC Installation & Service contractors listed in Atlanta, 62 advertise 24-hour availability and 107 are open on Sundays.
245
contractors listed
62
open 24 hours (28%)
107
open Sunday (49%)
154
open Saturday (70%)
156
have a website
Why Atlanta's humid weather breaks HVAC systems
In Atlanta, summer highs average 90°F. That strains compressors, refrigerant lines, and condensate drains. Common local issue: evaporator coil wear due to condensate buildup. Recommended: systems rated SEER2 17+ for this climate.
Atlanta's humidity regularly exceeds 70%. An oversized AC unit short-cycles before removing moisture effectively — correct Manual J load sizing prevents this.
Complete HVAC Installation & Service in Atlanta
System installation
Manual J sizing, duct design, and equipment commissioning.
Heat pumps
SEER2 and HSPF2 optimized heat pump installs.
Ductwork upgrades
Airflow balancing and duct sealing.
Smart controls
Thermostat calibration and zoning.
HVAC Installation & Service costs in Atlanta (2026 estimates)
| Service | Low | High |
|---|---|---|
| System replacement | $9,240 | $13,860 |
| Heat pump install | $10,920 | $16,380 |
| Ductwork upgrade | $3,780 | $5,670 |
Prices reflect local labor rates in Georgia.
Serving Atlanta and surrounding neighborhoods
Verified hvac installation & service companies cover ZIP codes across the Atlanta metro and surrounding areas.
Atlanta HVAC permits & rebates
Permits Required
Most system replacements in Atlanta require a permit from the Atlanta Building Department.
Available Rebates
Check for rebates with your local utility provider for SEER2 heat pumps, smart thermostats, and insulation upgrades.
Atlanta HVAC FAQ
Full system replacements in Atlanta average $8,000–$14,000 installed. Heat pump systems run $10,000–$16,000. Get at least 3 itemized bids including equipment, labor, permits, and disposal of the old unit.
Yes. Atlanta requires a mechanical permit for full system replacements and new gas line connections. Your licensed contractor must pull the permit before work starts and schedule a city inspection after installation.
Most straight-swap replacements take 4–8 hours. New construction installs or full duct replacements run 1–3 days. Confirm the scope includes equipment delivery, permit scheduling, and post-install commissioning.
Check license status through the Georgia state licensing board's online lookup tool. All installers working with refrigerant must also carry EPA Section 608 certification.
Top HVAC pros in Atlanta
Compare verified providers with strong local reputations and recent customer feedback.
Call to confirm availability and request a quote.
Call to confirm availability and request a quote.
Call to confirm availability and request a quote.
Need hvac installation & service in Atlanta today?
One call connects you with an available local contractor — no forms, no waiting.
HVAC Installation & Service reviews in Atlanta
Hear from Atlanta homeowners about their experience with local hvac installation & service companies.
🌟🌟🌟🌟🌟 — A timely, attentive, and potentially life-saving service I’m deeply grateful to the team at R. Wiley Heating & Air — and especially to the service technician, Kirby, who came out for our routine HVAC inspection. What could have been a simple maintenance visit turned into something much more important: Kirby noticed a disconnected furnace flue pipe in our attic, likely shaken loose during a recent roof replacement. Because of his attentiveness, care, and clear communication, a serious carbon monoxide hazard was identified and corrected. I’m not exaggerating when I say this may have saved lives. Kirby was professional, respectful, and grounded in his approach — and I could tell he genuinely cared about doing the job right. Thank you to R. Wiley Heating & Air for sending someone so thorough and trustworthy. I highly recommend this company for anyone who values both expertise and heart in the service they receive.
Fun activities once a month for kids. Check it out.
good experience looking for toilet
Una tienda muy completa segura para ir a buscar cualquier tipo de herramienta o repuestos para tu hogar o trabajo
Large store, somewhat difficult to find the right parts
HVAC Installation & Service performance guide for Atlanta, Georgia
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in Atlanta, Georgia
Atlanta, Georgia sits in a Hot-Humid climate zone with average summer highs near 90°F and winter lows near40°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
High moisture accelerates coil biofilm and condensate drain clogs. Target stable airflow, clean evaporator coils, and verified dehumidification control.
Most common local breakdowns
Condensate drain clogs and evaporator coil biofilm from high indoor humidity.
Blower motor strain from long run times and high static pressure.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Prioritize variable-speed heat pumps with enhanced dehumidification and SEER2 16+ ratings to protect refrigerant lines and the evaporator coil. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.
Local code and housing notes
Ask contractors about Georgia energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: Georgia HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank