Heating Services in Houston, TX
Heating Services companies serving Houston — compare ratings, hours, and contact details.
24
Pros actively working
4.3
What people rate them
94
Real reviews
Houston, Texas HVAC company map
See where the best heating services crews are located around Houston, Texas.
Loading the map...
Heating Services in Houston: what the listings show
Of the 24 Heating Services contractors listed in Houston, 2 advertise 24-hour availability and 8 are open on Sundays.
24
contractors listed
2
open 24 hours (11%)
8
open Sunday (44%)
12
open Saturday (67%)
16
have a website
Why Houston's humid weather breaks HVAC systems
In Houston, summer highs average 90°F. That strains compressors, refrigerant lines, and condensate drains. Common local issue: evaporator coil wear due to condensate buildup. Recommended: systems rated SEER2 17+ for this climate.
Houston's humidity regularly exceeds 70%. An oversized AC unit short-cycles before removing moisture effectively — correct Manual J load sizing prevents this.
Complete Heating Services in Houston
Furnace repair
Ignitor, flame sensor, and gas valve service.
Boiler service
Circulator and pressure diagnostics.
Heat pump tuning
Defrost cycles and auxiliary heat setup.
Emergency heat
Rapid heating restoration during cold snaps.
Heating Services costs in Houston (2026 estimates)
| Service | Low | High |
|---|---|---|
| Tune-up | $202 | $302 |
| Emergency call | $403 | $605 |
| Furnace replacement | $5,460 | $8,190 |
Prices reflect local labor rates in Texas.
Serving Houston and surrounding neighborhoods
Verified heating services companies cover ZIP codes across the Houston metro and surrounding areas.
Houston HVAC permits & rebates
Permits Required
Most system replacements in Houston require a permit from the Houston Building Department.
Available Rebates
Check for rebates with your local utility provider for SEER2 heat pumps, smart thermostats, and insulation upgrades.
Houston HVAC FAQ
Furnace repairs in Houston average $350–$900 in 2026. Ignitor and flame sensor replacements run $150–$350. Gas valve and heat exchanger repairs start at $600.
If your furnace is over 15–20 years old and repairs exceed $1,000, replacement is typically the better investment. High-efficiency 96% AFUE units qualify for federal tax credits and can reduce heating bills by 20–30%.
In Houston's hot-humid winters, look for 80% AFUE minimum. For colder climates or high gas rates, 96% AFUE condensing furnaces reduce costs significantly and qualify for IRA tax credits.
Yes. Houston requires a mechanical permit and gas line inspection for furnace replacements. Only licensed contractors should pull permits — unpermitted work can void warranties and create insurance liability.
Top HVAC pros in Houston
Compare verified providers with strong local reputations and recent customer feedback.
Rated 5.0 on Google. Call to confirm availability and request a quote.
Need heating services in Houston today?
One call connects you with an available local contractor — no forms, no waiting.
Heating Services reviews in Houston
Hear from Houston homeowners about their experience with local heating services companies.
Five stars for Boyer HVAC! Honest pricing, great communication, and professional service from start to finish.
I’m so impressed with Boyer HVAC. They diagnosed the problem fast and got my system running perfectly again.
Excellent service from Boyer HVAC. The technician was prompt, knowledgeable, and explained everything clearly.
Boyer HVAC was amazing! They fixed my air conditioning issue quickly and professionally. I couldn’t be happier with their service!
Working with Boyer HVAC was a pleasure from start to finish. Their customer service is excellent, their technicians are well-trained, and their work is flawless. They diagnosed the issue accurately, provided a fair estimate, and resolved everything efficiently. My HVAC system is performing perfectly now, and I couldn’t be happier. Their honesty and reliability truly set them apart. I highly recommend them for any heating and cooling needs! 🧰🔥🌬️
Heating Services performance guide for Houston, Texas
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in Houston, Texas
Houston, Texas sits in a Hot-Humid climate zone with average summer highs near 90°F and winter lows near40°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
High moisture accelerates coil biofilm and condensate drain clogs. Target stable airflow, clean evaporator coils, and verified dehumidification control.
Most common local breakdowns
Condensate drain clogs and evaporator coil biofilm from high indoor humidity.
Blower motor strain from long run times and high static pressure.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Prioritize variable-speed heat pumps with enhanced dehumidification and SEER2 16+ ratings to protect refrigerant lines and the evaporator coil. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.
Local code and housing notes
Ask contractors about Texas energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: Texas HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank