Gunnison, Utah

Heating Services in Gunnison, UT

Heating Services companies serving Gunnison — compare ratings, hours, and contact details.

Call (833) 542-6904Free estimate · No obligation · Open 24/7

1

Pros actively working

4.2

What people rate them

10

Real reviews

Gunnison, Utah HVAC company map

See where the best heating services crews are located around Gunnison, Utah.

1 on the map

Loading the map...

Heating Services in Gunnison: what the listings show

1 Heating Services contractors are listed in Gunnison, Utah. 0 of them are open on Sundays.

1

contractors listed

0

open Sunday (0%)

0

open Saturday (0%)

1

have a website

Counted from the listings on this page. Opening hours are published for 1 of 1; the rest do not list hours, so percentages are of those that do. Always confirm availability with the contractor.

Why Gunnison's dry weather breaks HVAC systems

In Gunnison, summer highs average 88°F. That strains compressors, refrigerant lines, and condensate drains. Common local issue: compressor wear due to high runtime. Recommended: systems rated SEER2 15+ for this climate.

Complete Heating Services in Gunnison

Furnace repair

Ignitor, flame sensor, and gas valve service.

Boiler service

Circulator and pressure diagnostics.

Heat pump tuning

Defrost cycles and auxiliary heat setup.

Emergency heat

Rapid heating restoration during cold snaps.

Heating Services costs in Gunnison (2026 estimates)

ServiceLowHigh
Tune-up$196$294
Emergency call$392$588
Furnace replacement$5,304$7,956

Prices reflect local labor rates in Utah.

Serving Gunnison and surrounding neighborhoods

Verified heating services companies cover ZIP codes across the Gunnison metro and surrounding areas.

84634

Gunnison HVAC permits & rebates

Permits Required

Most system replacements in Gunnison require a permit from the Gunnison Building Department.

Available Rebates

Check for rebates with your local utility provider for SEER2 heat pumps, smart thermostats, and insulation upgrades.

Gunnison HVAC FAQ

Furnace repairs in Gunnison average $350–$900 in 2026. Ignitor and flame sensor replacements run $150–$350. Gas valve and heat exchanger repairs start at $600.

If your furnace is over 15–20 years old and repairs exceed $1,000, replacement is typically the better investment. High-efficiency 96% AFUE units qualify for federal tax credits and can reduce heating bills by 20–30%.

In Gunnison's mixed-dry winters, look for 80% AFUE minimum. For colder climates or high gas rates, 96% AFUE condensing furnaces reduce costs significantly and qualify for IRA tax credits.

Yes. Gunnison requires a mechanical permit and gas line inspection for furnace replacements. Only licensed contractors should pull permits — unpermitted work can void warranties and create insurance liability.

Top HVAC pros in Gunnison

Compare verified providers with strong local reputations and recent customer feedback.

View all providers
Hill's Heating & Air Conditioning, Inc
Gunnison, Utah
+1 435-528-3988
Repair Services
Accessible Entrance
Accessible Parking Lot


Need heating services in Gunnison today?

One call connects you with an available local contractor — no forms, no waiting.

No cost, no obligation
Available 24/7
No account needed

Heating Services reviews in Gunnison

Hear from Gunnison homeowners about their experience with local heating services companies.

4.0 avg
Gunnison, Utah
Oct 29, 2025

Very nice job on the chimney clean. Efficient, and they didn't leave a speck of dust / ash. Nice guys to work with. I would have loved it if they would have been able to give a firm appointment date a little further in advance but I'll definitely use them again.

M
Martijn van Exel
May 22, 2025

We love this company! They installed our new furnace in January and our new air conditioner about a week ago. Great prices, wonderful people to work with. Tried out the ac just today and are appreciating it very much! I would highly recommend Hills Heating!!

K
Kristy Wilkey
Nov 12, 2024

We called about our heating, and they came right out The tech was josh. He was nice and friendly. He figured out the problem immediately and was able to fix it on the spot. Long story short, our heat wasn't working, and he looked at everything, and it was a simply fix. He explained everything to me for both thermostats Set them for me, and the price was extremely reasonable We also were giving an estimated time of arrival call, then a call from Josh saying how far away he was! Thank you. we will sleep warm tonight, lol

S
Stacy grover

Heating Services performance guide for Gunnison, Utah

Mixed-Dry zone
Summer avg 88°F
Winter avg 28°F

Climate averages are state-level reference values, not city-specific measurements.

Climate impact in Gunnison, Utah

Gunnison, Utah sits in a Mixed-Dry climate zone with average summer highs near 88°F and winter lows near28°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.

Seasonal swings stress refrigerant lines and condenser capacity. Verify charge and airflow to protect the evaporator coil.

Most common local breakdowns

  • Capacitor wear and refrigerant line-set leaks after wide temperature swings.

  • Outdoor coil fouling that raises head pressure and stresses the compressor.

Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.

Equipment recommendation

Look for two-stage systems with SEER2 16+ to manage shoulder-season swings without overworking the blower motor. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.

Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.

System fit selector

Local code and housing notes

Ask contractors about Utah energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.

  • Mechanical permit for system replacement and condenser swaps.

  • Post-install inspection covering refrigerant line pressure and condensate drain routing.

  • Load calculation proof to avoid short-cycling compressors.

  • Airflow verification (blower motor speed + static pressure).

Always confirm a contractor's license and insurance before hiring.

Learn more: Utah HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank

This page is set to noindex because fewer than 5 listings are available in Gunnison.