HVAC Installation & Service in Roland, OK
HVAC Installation & Service companies serving Roland — compare ratings, hours, and contact details.
2
Pros actively working
4.9
What people rate them
10
Real reviews
Roland, Oklahoma HVAC company map
See where the best hvac installation & service crews are located around Roland, Oklahoma.
Loading the map...
HVAC Installation & Service in Roland: what the listings show
2 HVAC Installation & Service contractors are listed in Roland, Oklahoma. 0 of them are open on Sundays.
2
contractors listed
0
open Sunday (0%)
1
open Saturday (50%)
2
have a website
Why Roland's mixed weather breaks HVAC systems
In Roland, summer highs average 85°F. That strains compressors, refrigerant lines, and condensate drains. Common local issue: compressor wear due to high runtime. Recommended: systems rated SEER2 15+ for this climate.
Complete HVAC Installation & Service in Roland
System installation
Manual J sizing, duct design, and equipment commissioning.
Heat pumps
SEER2 and HSPF2 optimized heat pump installs.
Ductwork upgrades
Airflow balancing and duct sealing.
Smart controls
Thermostat calibration and zoning.
HVAC Installation & Service costs in Roland (2026 estimates)
| Service | Low | High |
|---|---|---|
| System replacement | $8,976 | $13,464 |
| Heat pump install | $10,608 | $15,912 |
| Ductwork upgrade | $3,672 | $5,508 |
Prices reflect local labor rates in Oklahoma.
Serving Roland and surrounding neighborhoods
Verified hvac installation & service companies cover ZIP codes across the Roland metro and surrounding areas.
Roland HVAC permits & rebates
Permits Required
Most system replacements in Roland require a permit from the Roland Building Department.
Available Rebates
Check for rebates with your local utility provider for SEER2 heat pumps, smart thermostats, and insulation upgrades.
Roland HVAC FAQ
Full system replacements in Roland average $8,000–$14,000 installed. Heat pump systems run $10,000–$16,000. Get at least 3 itemized bids including equipment, labor, permits, and disposal of the old unit.
Yes. Roland requires a mechanical permit for full system replacements and new gas line connections. Your licensed contractor must pull the permit before work starts and schedule a city inspection after installation.
Most straight-swap replacements take 4–8 hours. New construction installs or full duct replacements run 1–3 days. Confirm the scope includes equipment delivery, permit scheduling, and post-install commissioning.
Check license status through the Oklahoma state licensing board's online lookup tool. All installers working with refrigerant must also carry EPA Section 608 certification.
Top HVAC pros in Roland
Compare verified providers with strong local reputations and recent customer feedback.
Need hvac installation & service in Roland today?
One call connects you with an available local contractor — no forms, no waiting.
HVAC Installation & Service reviews in Roland
Hear from Roland homeowners about their experience with local hvac installation & service companies.
The experience was As Good As It Gets!
Went to turn the heat on for the first time this season and guess what it didn’t come on. I called Freeman after you were recommended by our builder. You all came the next day and had to order a part it came the next day. You came out that day and installed it and we have heat. The guy was super polite and did a great job.
Great service! Very professional!
Our old HVAC unit had completely gone out and we got ahold of Freeman Heat and Air for a new one. They were quick to figure out what we needed and were able to install it in a timely manner. The reason for the 3 stars is due to a couple of things. The techs who came to our house left quite a few nails scattered across our driveway, luckily my wife realized it and we got all of them before one of our kids or tire got it first. While in the attic for duct work, they cut our internet cable (Which isn't that big of a deal, accidents happen and the owner was very kind and paid for it). We also were told the new unit doesn't need a filter, which we were confused about but went with it until we were having heat problems then we checked the unit and saw we do need a 20x20 filter so its been running for a couple of months without it even though the techs said we didn't need one. So no telling how much dirt and whatever else has been caught up in the brand new unit we've spent a ton of money on. Lastly, our heat wasn't working and when we turned it on it blew cold air and the outdoor unit wasn't running. They were going to have a tech out next day but said that it was fine and they just needed to get it ready for the cold weather, which I don't understand because its a new system it should already be ready to produce heat and cold air. It ended up really cold in the house so an HVAC friend of mine came and looked to see what was going on and noticed that the settings on the outdoor unit were messed up so he set it to factory reset and the heat began working after that. Overall very nice people but not completely satisfied with spending thousands of dollars for subpar service.
Freeman Heat and Air worked on the balancing between the heat pump and transition to gas heat when the temp dictated that transition. The technician, Brandon, did a very thorough job of it as it was not simple.
Tanner & Dolly are always ready to help me with my a/c. They are polite and knowledgeable. I called last week at 4:30 pm my a/c wasn’t working. Dolly was going to try to get a tech right away, I’m not used to that kind of service. I told her if somebody could come out tomorrow that would be great. Tanner called the next morning to say he’s on his way. The problem was a previous service company had used a cheap China part. Tanner had the USA made part(they only use parts made in the USA) he installed the new part and was on his way in about 30 minutes. I recommend Mountain Air Cooling & Heating .
HVAC Installation & Service performance guide for Roland, Oklahoma
Climate averages are state-level reference values, not city-specific measurements.
Climate impact in Roland, Oklahoma
Roland, Oklahoma sits in a Mixed-Humid climate zone with average summer highs near 85°F and winter lows near25°F. Those swings load the evaporator coil, blower motor, refrigerant lines, and condensate drain. Keep a clean MERV filter to protect the compressor.
Seasonal swings stress refrigerant lines and condenser capacity. Verify charge and airflow to protect the evaporator coil.
Most common local breakdowns
Evaporator coil icing from low airflow and clogged filters.
Capacitor failures on the condenser during peak cooling loads.
Low airflow from dirty MERV filters or a weak blower motor causes ice. Ask for airflow and refrigerant superheat checks.
Equipment recommendation
Balanced systems with SEER2 15+ and solid filtration protect the blower motor, coils, and compressor year-round. Seal ductwork and schedule coil cleaning to protect the heat exchanger, capacitor, and compressor.
Heat pumps favor variable-speed compressors and tight refrigerant line sets to stabilize humidity control.
Local code and housing notes
Ask contractors about Oklahoma energy code compliance and permits. Older homes often benefit from ductless mini-splits to reduce line-set length and improve zone control.
Mechanical permit for system replacement and condenser swaps.
Post-install inspection covering refrigerant line pressure and condensate drain routing.
Load calculation proof to avoid short-cycling compressors.
Airflow verification (blower motor speed + static pressure).
Always confirm a contractor's license and insurance before hiring.
Learn more: Oklahoma HVAC coverage · SEER2 rating guide · MERV filter selection · Editorial Policy · How We Rank
This page is set to noindex because fewer than 5 listings are available in Roland.